Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Malibu, CA
Malibu gate work runs into conditions you won’t find ten miles inland. Salt air eats powder coating. Winter storms shift hillside posts. Custom steel and wrought iron gates on long beachfront and canyon driveways take a beating year-round, and when they fail, it’s rarely a simple hinge replacement. Our crews work on the systems Malibu homes actually have, from older slide operators on ranch-style properties to newer swing systems on modern estates. If you’ve got a gate that won’t open, a motor that’s making noise it shouldn’t, or a frame that’s rusted through, call us at (805) 309-3048 and we’ll get a technician out to look at it.
Why Malibu Homes Are Different
Malibu’s geography shapes every gate job here. The city stretches for 21 miles along the coast, but only a few miles inland in most places, which means many properties sit on hillsides or directly on the beach. A gate on a Point Dume bluff faces different problems than one in Malibu Park: the bluff gate gets constant salt spray, while the canyon gate deals with drainage runoff and shifting soil. After a heavy rain, we routinely see hillside gates that have gone off-track because the ground under one post settled half an inch. That’s not a hinge adjustment; it’s a post reset, usually deeper than the original install, sometimes with new concrete or adjustable hinges to buy the gate some forgiveness for the next storm.
Age matters too. Malibu’s housing stock runs from mid-century beach houses to new construction on large lots, and the older gates often predate current safety requirements. A 1990s slide gate in Las Flores Canyon might have no loop detector at all, or an operator that’s been out of production for a decade. The marine layer doesn’t help: it keeps humidity high through the summer mornings, which accelerates rust on mild steel and uncoated hardware. Any repair we do in Malibu has to account for that environment, or we’re just setting up the next call. That’s why we specify stainless or marine-grade hardware on replacements here, even when the original part wasn’t.
Styles & brands we work with
Our Main Malibu Services
Most Malibu homeowners call us for one of three things: a gate that’s stopped working, a motor or operator that’s failed, or a full replacement when patching doesn’t make sense anymore. Each has its own page with pricing and what the job involves.
Gate Repair in Malibu
Repair work in Malibu usually starts with figuring out whether the problem is structural, electrical, or mechanical. Salt corrosion on hinges and tracks, debris from winter storms packed into slide tracks, sagging frames from post movement, broken limit switches, failed loop detectors: we see all of it. A repair might mean welding a cracked weldment, replacing rusted hardware, or rehanging a gate that’s dragging on its track. We quote the work in writing before anything gets touched, and every repair carries a written one-year guarantee. See Gate Repair in Malibu for pricing and service detail.
Gate Installation in Malibu
New gate installations in Malibu are often custom work. Driveways on hillside lots mean swing gates need proper clearance for a sloped approach, and slide gates need enough runback room on the side. Beachfront properties call for materials that hold up to salt air: aluminum, powder-coated steel, or properly treated wrought iron, with stainless hardware throughout. We measure, spec the gate and operator, and deliver a written price before ordering anything. This isn’t a same-day job and we won’t pretend it is. See Gate Installation in Malibu for the full scope.
Gate Motor Repair in Malibu
Malibu’s mix of older operators and salt exposure creates a specific set of motor failures. Overheated motors on inland canyon properties in summer, corroded circuit boards on beachfront gates, limit switches that have drifted, and swing arms that have seized from rust. We stock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means we can usually repair on the first visit instead of ordering and coming back. See Gate Motor Repair in Malibu for common failure signs and what repairs cost.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Malibu
We work on the operators most common across Malibu driveways, including LiftMaster, FAAC, Elite, and Mighty Mule. Our technicians carry parts for these systems, which cuts down on second trips. See our brands for the full list and what we stock.
See the difference
Before
After
Before
AfterPricing for Gate Company in Malibu, CA
| Service | Typical range in Malibu |
|---|---|
| Gate repair diagnostic visit | $75 – $150 |
| Hinge replacement (pair, welded or bolted) | $250 – $650 |
| Slide gate track repair or replacement | $400 – $1,200 |
| Gate frame straightening and welding | $350 – $900 |
| Gate opener replacement (operator only) | $800 – $2,200 |
| Loop detector replacement | $300 – $700 |
| Limit switch replacement | $200 – $450 |
| New gate and operator (full install) | $4,500 – $18,000 |
| Safety sensor addition or upgrade | $350 – $900 |
| Gate post reset (hillside shift repair) | $700 – $2,500 |
Malibu pricing runs higher than inland areas for two reasons: the environment demands better materials, and hillside access often means working on slopes that slow the job. A marine-rated hinge assembly costs more than a standard one, but it’s the difference between a five-year fix and a five-month one. Whatever the number, you’ll see it in writing before we start, and the price doesn’t move once the work begins.
Neighborhoods We Serve in Malibu
We cover all of Malibu, from the beach communities to the canyon roads. Response time in the area runs same-day or next day for most repair calls, depending on what’s already scheduled.
- Point Dume
- Malibu Park
- Las Flores Canyon
- Big Rock
- Malibu West
Service Area – Cities Near Malibu
We also serve the communities just over the hills and along the 101 corridor. If you’re in Agoura Hills, CA, Westlake Village, CA, Thousand Oaks, CA, or Calabasas, CA, the same written-price, written-guarantee standard applies on every gate job.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Malibu
We schedule repair calls in Malibu same-day or next-day in most cases. Dispatch is coordinated from the brand’s Los Angeles office, but the technicians dispatched to Malibu live and work in the region, so they’re not fighting cross-town traffic to reach you. Call (805) 309-3048 and we’ll give you a real arrival window, not a vague promise.
It depends on the scope. Basic repairs, motor swaps, and like-for-like replacements generally don’t trigger city permit requirements, but new gate installations or post work in hillside zones can. Many Malibu HOAs, particularly in gated communities, also have design standards that govern gate style and height. We’ll flag what applies on your property before you commit to anything.
Yes. The written quote we give you before work starts is the price on the invoice, unless we find something genuinely dangerous hidden inside the job and you approve the change in writing first. We don’t do “while we’re in there” upcharges. That practice is exactly what The Garrison Standard was built to eliminate, and every Carver technician operates under it.
If your Malibu gate is acting up, call (805) 309-3048 for a free estimate. A live person answers, 24 hours a day, every day of the year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Malibu Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.