Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Calabasas
Gate installation in Calabasas typically runs $4,500 – $18,000 for a complete driveway gate with motor, and takes 2 – 4 weeks from measure to final inspection. Most estate properties here need a custom-fabricated ornamental steel or iron gate, a new operator matched to the gate’s weight, and safety retrofits that meet UL 325. We know Calabasas because we work here every week, and we understand that a gate on this side of the hill is not a decoration. It’s the first physical layer between your family and everyone else. Call (805) 309-3048 for a free on-site measure and a written price before any work begins.
Why Carver Gate Repair Thousand Oaks Is Calabasas’s Preferred Gate Installation Company
Calabasas homeowners call us because we write the price down before we touch anything. That’s the Garrison Standard, and it’s been our operating rule since 2008. No number moves at the door. The technician who shows up is background-checked, uniformed, and dispatched from the brand’s Los Angeles office to serve Calabasas directly. Lonnie Burke runs our operation, and he holds every tech to the same rule: leave the property cleaner than you found it, and stand behind the work for a full year.
Most of the calls we run in Calabasas are on gates that are 15 to 30 years old. The original operator is long discontinued. The hinge posts may have moved. The keypad face is cracked from years of direct sun. We’re not showing up to sell a full replacement when a retrofit makes sense, and we’re not going to let you spend money on a new motor bolted to a post that’s already failing. That distinction is what keeps people in The Oaks and Mountain View Estates calling us back. Strong local reputation, written guarantees, and crews who know the difference between a bad control board and one that just needs a thermal break.
Styles & brands we work with
Automatic Gate Installation in Calabasas
Automatic Gate Installation in Calabasas usually means one of two things: a new gate and operator for a driveway that’s never been automated, or replacing a legacy operator on a gate that’s been swinging since before modern safety sensors existed. Either way, the job starts with a measured look at the gate’s actual weight, the condition of the posts, and the power situation at the pad. Too many operators get sized by guesswork, and the motor burns out inside a year. We don’t guess. A complete automatic driveway gate with a quality operator typically lands between $6,000 and $14,000 in Calabasas, depending on sliding versus swing and whether new posts are required.
Retrofitting an Operator vs. Replacing Everything
There is a real decision here, and the honest answer depends on the post footings and the gate frame. If the posts are plumb and the footing is sound, a new operator on an existing gate runs $2,800 – $5,500. If the post has drifted or the gate has sagged, you’re paying twice: once for the motor that burns out, then again for the structural fix that should have happened first. In Calabasas’s dry, shifting soil, a gate that’s been hanging for 25 years has often moved more than the eye can see.
New Gate and Operator, Built to Last
When replacement is the cheaper long-term answer, we build for the conditions here. That means powder-coated steel or iron, sealed control boxes, oversized post footings, and operators rated for more cycles than the gate will realistically see. The goal is a system that runs quiet and consistent for 20 years, not one that needs attention every August when the heat wave hits.
Gate Installation Services in Calabasas
Gate Installation Services in Calabasas cover the full scope: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A pedestrian gate install is the leanest at $1,200 – $2,800. A large double swing driveway gate with full automation on ornamental iron typically runs $8,000 – $18,000. Every job includes the safety photo eyes, the force settings, and the signage UL 325 demands, all tested in front of you before we leave.
Driveway and Double Gates
Most Calabasas estate homes run a double swing or a single slide gate at the street, then a second gate at the motor court. We size operators for actual gate weight, not the manufacturer’s ideal-case chart. That’s the difference between a gate that works for two decades and one that eats a motor every summer.
Security and Pedestrian Gates
A separate pedestrian gate keeps the driveway gate from cycling every time a delivery arrives or a landscaper walks on site. We install them with the same access protocol as the main gate, so one keypad or one remote covers both. Security gates on hillside lots often mean a slide configuration, and we handle the track, the rack, and the slope correction so the gate doesn’t drift once the Santa Anas start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Calabasas
Our technicians are trained on nine gate-motor brands, and in Calabasas that most often means DoorKing, Linear, Ghost Controls, and Elite. Older DoorKing and Linear boards are common in the guard-gated communities, and Ghost Controls shows up more on newer slide operators. We keep a local parts stock for Calabasas jobs, which means a bad limit switch or a failed control board doesn’t have to mean two weeks of waiting on a backordered part from Texas. The right part gets matched to the system already in the ground.
See the difference
Before
After
Before
AfterCommon Gate Installation Problems We See in Calabasas Homes
- Legacy control boards failing in heat waves: Pre-2010 DoorKing and Linear boards can run for years and then lose firmware memory during a Calabasas summer stretch, defaulting the gate to manual-only. It usually happens on a Friday before a big estate event.
- Worn hinge posts on older swing gates: The dry, shifting Calabasas soil lets a heavy gate sag until the operator’s torque arm binds. A new motor bolted to a failing post burns out within a season, which is why we check the post before we quote the operator.
- Cracked keypad faces from direct sun: Years of Calabasas ultraviolet on a plastic keypad face let dust from the hillsides into the membrane switches. Phantom codes, lockouts, and dead buttons typically mean replacing the keypad and wiring harness, not a cheap repair.
- Double gate systems that don’t talk to each other: The community entry loop and the private driveway gate often share an access protocol. When a new operator doesn’t integrate with the existing loop detector, the homeowner can’t even reach their own driveway gate.
Pricing for Gate Installation in Calabasas, CA
Here are the numbers we give Calabasas homeowners over the phone and in writing, before anything is ordered:
- New operator retrofit on an existing sound gate: $2,800 – $5,500
- Complete single swing automatic driveway gate, new gate and operator: $4,500 – $9,500
- Complete double swing automatic driveway gate, new gate and operator: $8,000 – $18,000
- Slide gate with track and rack, new gate and operator: $6,000 – $14,000
- Pedestrian gate, new gate and hardware: $1,200 – $2,800
- Keypad, loop detector, or intercom add-on: $600 – $2,200 depending on integration
The written price covers the gate, the operator, the post work, the safety sensors, the programming, and the testing. It’s the exact number you’ll pay. Estimates are free, and we won’t start a single thing until you’ve approved the written quote.
We Also Serve Cities Near Calabasas
Our crews work throughout the west San Fernando Valley and the Santa Monica Mountains corridor. In addition to Calabasas, we serve West Hills, Topanga, Canoga Park, and Agoura Hills with the same written pricing and one-year guarantee. If you’re in one of those areas, our Gate Installation team covers the same scope of work. Calabasas remains a core area for us, and we can usually schedule a measure within a few business days.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Calabasas
It depends on the post footings and the gate frame, and we’ll tell you the truth either way. If the posts are plumb and the hinge welds are sound, a new operator retrofit runs $2,800 – $5,500 in Calabasas. If the post has drifted or the gate has sagged more than a fraction of an inch, you’ll spend less replacing the post and rehanging the gate now than you will replacing a burned-out motor every summer. Call (805) 309-3048 and we’ll measure it on site, free.
Yes, but the access protocol has to be matched, not just spliced. We install solar openers on private driveway gates in communities like The Oaks and Mountain View Estates so the new operator reads the community loop detector and opens on the same command the old gate did. Done right, you don’t touch the HOA system. Done wrong, you can’t even get to your driveway. We handle the integration, including the solar panel placement and battery sizing for Calabasas sun exposure.
Yes, and slope is the reason most slide gate failures happen. We cut the track to the slope, set the rack with the right clearance, and choose an operator rated for the extra drag. On a steep Calabasas driveway, a slide gate installed without slope correction will bind within months. A properly set slide gate on a hillside lot runs $6,000 – $14,000 complete, and honest slope work is most of the difference. Call (805) 309-3048 for a free measure.
UL 325 requires photo eyes, contact edges or obstruction sensors, a reversing mechanism, and audible alarms on certain operator types, plus warning signage at every exposed pinch point. We install all of them and test each one in front of you before we call the job done. If a sensor fails a test, the gate doesn’t get left running. That’s not optional, and it’s not a line item you can delete. It’s the code, and we won’t shortcut it.
Most times, the motor didn’t fail on its own. The old operator was matched to the gate’s original weight, and over 20 years the gate gained mass: new cladding, a heavier lock, a different hinge geometry. Or the post had moved slightly, adding drag. The new motor was sized for the old spec, not the current reality, and Calabasas heat pushed it past its thermal limit. We size operators for the gate as it sits today, not the catalog number it had in 2005. That’s why we measure before we quote.
Ready to stop guessing? Call (805) 309-3048 for a free on-site measure and a written price. The number you approve is the number you pay, and the work is guaranteed in writing for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair Thousand Oaks, serving Calabasas and the surrounding area.